JOBS /  RESUMES
oil and gas jobs recruiting search jobs employment opportunities in oil and gas industry resumes and cvs
HOME JOB SEARCH POST JOBS DRILLING EQUIPMENT CONTACT US RUSSIAN
Enter
Username:
Password:

Register here



S Series Bits
for sale in Russia/Caspian: Russia, Kazakhstan, Azerbaijan, Ukraine, Belarus, Uzbekistan, Tajikistan, and Turkmenistan

Standard design bits targeted at medium to hard formation types. These bits are designed for long shale, limestone and porous sandstone formations. There are many models dedicated to highly interbedded drilling, with some overlap into the F-Series, for long intermediate intervals. S-Series options include bits with twin cutters, Hyper Aggressive (HA) profile, Super Duty (SD) gage and many different nozzle options.

Click on the brown link to get detailed info on the product or service or drop us a line in English or Russian at equipment@neftegaskadry.com or call at 007-495-542-0468 (English, Russian).

S-6133 Specifications

The S-6133 is a 6-blade design employing a broad contoured nose, ideal for long runs in moderately interbedded drilling. The S-6133 uses 13mm PDC cutters to maximize bit life. It is available with several combinations of fixed ports. The 2 nozzle, single port design is standard. It provides some additional cutter density over a 3 nozzle design.
SPECIFICATIONS 5-3/4
Primary Face Cutters24
Gage Cutters6
Gage Length2
Nozzles2/1
Connection3-1/2 REG
Length (Overall, Make-Up)12-1/8, 8-3/8


The S-6133 is targeted for soft to moderately firm formations, with minor abrasive content. Shales, marls and siltstones are easily drilled with the S-6133. Highly reactive clays and gumbos can be drilled with an inhibitive or encapsulating mud system and with increased pump rate across the bit to facilitate cleaning. The S-6133 is well behaved on downhole motors, with manageable drilling torque for a more aggressive design. This bit can be run at lower flow rates when drilling in oilbase mud systems. Versions of the S-6133 are available with different nozzle configurations, a short radius drilling option, and a more aggressive profile.
OPERATING PARAMETERS 5-3/4
Make-Up Torque (max)6-9K ft/lb
Flow Rate (GPM)100-250
RPM Range90-250
Bit Weight (LBS)2K 25K


S-6133D Specifications

The S-6133D is a 6-blade design employing a moderate nose, tailored for directional work in both abrasive and moderate formations. The S-6133D uses 13mm Twin Cutters to accommodate directional applications and minimize wear. High junk slot volume and blade standoff enhance cleaning. The S-6133D can drill carbonates and abrasive sandstones, and is especially well suited for drilling laterals and deviated wellbores.
SPECIFICATIONS 6
Primary Face Cutters26
Secondary Face Cutters8
Gage Cutters6
Gage Length2
Nozzles3
Connection3-1/2 REG
Length (Overall, Make-Up)12-1/8, 8-3/8


The S-6133D is designed for medium to hard formations, with abrasive content. Hard shales and reactive clays can be readily drilled with this bit using appropriate waterbase muds. PDC drillable float equipment allows the S-6133D to drill out and complete long intervals at high rates of penetration. Versions of the S-6133D are available with modified nose profile, and SideWinder option and gage modifications for directional work. The standard product configuration is three (3) nozzles. Super Duty (SD) gage option is also available.
OPERATING PARAMETERS 6
Make-Up Torque (max)6-9K ft/lb
Flow Rate (GPM)150-300
RPM Range60-160
Bit Weight (LBS)2K 28K


More "S" Series Technical Data here



  :: Copyright 2005-2012 NefteGasKadry LLC ::